top of page
P1033637.jpg

BLOG

Learn More About What We Have to Offer

Scroll Down

The Evolution And Various Classic Styles Of Wall Panelling

The modern wooden wall panelling serves a lot more than aesthetics. Its design is obviously of extreme significance, which is why so many people choose to clad their walls with it.


In addition to giving dimension and texture, it is a tactile substitute for paint or wallpaper that is also rather easy to install. Fitting hardwood wall panelling can be installed directly to a wall's surface without the need to fill up tiny holes or hairline cracks, unlike most other wall coverings that necessitate a lot of preparation.


The Evolution And Various Classic Styles Of Wall Panelling

In this article, we’ll go through the history of wall panelling and the various classical styles it has gone through.


What Is Wall Panelling?

What is wall panelling

In modern architecture, wall panelling is a recurrent and common wall application. When other building materials are not as durable and non-porous, the panels can be put over those components in a building's frame.


A building or house may have wall panelling installed on both the interior and exterior. Stone rooms were first made more livable by adding wall panelling. The purpose of the panels was to provide insulation between the room and the stone wall.


Although it still fulfils this purpose, interior wall panelling primarily functions as aesthetic. In some cases, wall panelling can even take the place of an entire wall.


Wall Panelling In The Gothic Era


Panelling was utilised to highlight the luxury and cosiness of the period's interior design throughout the Gothic (Tudor and Elizabethan) eras. Early Tudor walls were mostly made of fielded panels, with the central portion raised above the framing. Currently, Hampton Court Palace in London has panelling that exemplifies this design.


While panelling was exclusively employed on ceilings during the Italian Renaissance, it became more simplistic during the English Renaissance. In the 17th and 18th centuries, panelling gained popularity in several of the newly established Southern Colonies of the United States.


The most common materials used for panelling during this time were oak or pine.


Wall Panelling In The Victorian Era


In order to protect the wall from chairs during the Victorian era, wall panelling was only allowed to extend so high on the wall before being topped off with a dado rail. The wall panels' intricate designs, primarily geometric and featured stripes, were chosen to accent the period's lavish decorations.


Additionally, the tall skirting boards and cornices would look phenomenal with the wall panels. During this time, more materials were employed for panelling, including:


  • Solid wood (walnut, birch or redwood)

  • Plywood (a thin wood veneer on a plywood base)

  • Hardwood

  • Translucent materials (lucite)


The Reintroduction of Wall Panels

The reintroduction of wall panels

In recent times, wall panels have reappeared in people's homes. Prior to the invention of MDF and technological advancements, wall panels were mostly used in the homes of the wealthy and were, therefore, more expensive for all.


Additionally, more individuals are looking at measures to insulate their homes due to the rising cost of living, particularly in relation to heating costs. Besides providing insulation for your home, wall panels can also provide elegance to any space.


The Various Classic Styles Of Wall Panelling

The Various Classic Styles Of Wall Panelling

Period wall panelling comes in a variety of styles that are reflective of iconic bygone periods. Here are a few of the most popular ones that can be refurbished or recreated.


Shaker Panelling

A flat centre panel and square edge are characteristics of the Shaker style. Designs are often symmetrical and have simple embellishments with little to no detailing. The simplicity and lack of decoration of the mid-1800s are echoed in the Shaker style's straight lines.


Shaker-style wood panelling is the ideal complement to kitchen design or to create a continuous flow from entrance halls into the kitchen space. As such, Shaker-style kitchens are still popular today.


Rectangular And Square Panelling

Rectangular or square panelling, probably one of the most common designs, is intended to be paired with the following:


  • Dado rails

  • Skirting

  • Edging

  • Beading


Softwood beading can be added to larger open squares, making them ideal for any of the following rooms:


  • Dining areas

  • Home offices

  • Reception areas


Always keep in mind that the larger the space, the larger the squares or rectangles can be.


Tongue And Groove Panelling


Vertical grooves create the appearance of higher ceilings, making them ideal for use in small hallways or any space with a low ceiling. An interior with tongue and groove wood panelling offers a beachy Victorian ambience. Consider going full height from the floor to the ceiling or half height from the dado rail.


Create The Perfect Room Will Wall Panelling


Walls can now be panelled in a wide range of exquisite timbers worldwide. It is possible to customise panelling to complement both classic and contemporary interior design.


Always keep in mind the time period, history, or era you're trying to emulate when decorating your home. The interior design and architecture of your home should be influenced by this factor.


Choose Javier Wall Panels For Your Home


Founded in 2006, Javier is a manufacturer of high-quality home furnishings. Javier creates a wide variety of home furnishings using Bespoke design, premium materials, and expert craftsmanship. They are revolutionary in their production methods, selection of materials, and level of customisation.


Additionally, Javier is a notable furniture expert and is known for integrating robotic technology with handcrafting methods. All of Javier's handiwork is created by artisans, giving it a truly one-of-a-kind and artistic quality. The artisans who work as a team to create the finished item include wood carvers, inlayers, painters, marquetry artists and embroiderers.


In order to obtain a high-quality finish, Javier uses the most recent technologies, such as a dry oven, a pressurised filter spray booth, and a 3D robotic CNC with extremely high precision.


Interested in a bespoke wall panel for your home?


Consider engaging Lux & Beyond for finely crafted, fully customisable interior finishing and inspirational lighting. With more than 20 years in the interior industry and vast experience and understanding of the local market, the brands we curate are carefully selected to fit the local market, highly reputable, and well-established with good quality.


The suitability and sustainability of the materials and products are also taken into account based on the condition and humidity of the local environment. Find out more by visiting https://www.luxandbeyond.sg/contact-us.

126 views1 comment

1 Comment


Suraj Gowardipe
Suraj Gowardipe
Mar 14

This article offers a concise journey through the evolution of wall panelling, highlighting its significance in both historical and modern architecture. From its practical origins to its aesthetic versatility, wall panelling continues to charm with classic styles like Shaker and Tongue And Groove. Moreover, companies like Javier are pushing boundaries with innovative craftsmanship, marrying tradition with technology for exquisite home furnishings.

-Frikly

Like
bottom of page